About This Archive  | DCHAS-L 2006 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: FW: Csusafety Digest, Vol 7, Issue 1
Date: Tue, 2 May 2006 13:00:38 -0700
Author: Regina Frasca 		Next by Date:
Subject: Protocol for Cleaning fuel tanks
Date: Mon, 8 May 2006 13:42:51 -0400
Author: Dave Sembrot


Date: Tue, 2 May 2006 17:18:13 -0400
Reply-To: List Moderator <esf**At_Symbol_Here**UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: List Moderator <esf**At_Symbol_Here**UVM.EDU>
Subject: Protocol for Cleaning fuel tanks

From: 	  mgehs**At_Symbol_Here**yahoo.com
Date: 	May 2, 2006 2:49:00 PM EDT (CA)

Does anyone have a ready to adopt a written safety
program for purging /cleaning/prepping of above ground
fuel tanks before implementing a hot work program?

    thanks

Mark Gardner
mgehs**At_Symbol_Here**yahoo.com

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.