Date: Thu, 6 Sep 2007 08:14:31 -0400
Reply-To: "Jeskie, Kimberly B." <jeskiekb**At_Symbol_Here**ORNL.GOV>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Jeskie, Kimberly B." <jeskiekb**At_Symbol_Here**ORNL.GOV>
Subject: Looking for speakers for Spring ACS Meeting
The call for papers is out for a symposium sponsored by the ACS Division
of Chemical Health and Safety in which we want to talk about the ways
people go about conducting hazard and risk assessments including the
used of control banding in those assessments.  It's a wide category, so
lots of topics would fit under this category.  I would be particularly
interested in sharing ways we assess the hazards and risks for
laboratory (and non-laboratory chemical users for that matter) and
prepare them to go to work.  What does that process look like and what
do you think are the critical pieces of making that process work well?


If you are interested in presenting a paper in this symposium, please,
submit an abstract through OASYS
( or contact me directly at the
number or e-mail address below.  Abstracts are accepted through October


Kimberly Begley Jeskie, MPH-OSHM

Operations Manager

Physical Sciences Directorate

Oak Ridge National Laboratory

(865) 574-4945 




Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.