Date: Tue, 21 Dec 2010 15:01:36 -0500
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Fred Simmons <fred.simmons**At_Symbol_Here**SRS.GOV>
Subject: Re: Precipitate Sampling
In-Reply-To: <AANLkTimqbkPDK92kDvaAurvM_RdRHqLS_XxGNV=HAOAi**At_Symbol_Here**mail.gmail.com>


Wendy,

You're correct about the TCLP, I would at a minimum expect to find silver 
and chromium from the photo lab and almost any metal from the metals lab, 
especially those used in plating.  Depending on the type of film they were 
processing you may also find residual organics form the color dyes. Beyond 
that there may be salts of acids such as acetic and, ammonium dichromate, 
sulfite(s), hydroxides etc. 

Fred

Fred simmons
Savannah River Nuclear Solutions


From:   Wendy Campbell 
To:     DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Date:   12/21/2010 02:37 PM
Subject:        [DCHAS-L] Precipitate Sampling
Sent by:        DCHAS-L Discussion List 


Hey all,

I just ran into an interesting situation.  Some years ago, there was a 
plumbing leak in a pipe tunnel.  The "grey" water in the lines that leaked 
out originated in a photography teaching lab and a metal arts teaching 
lab.  After the leak was fixed, the water was simply allowed to dry in the 
tunnel and now there is a lot of dust left on the floor.  There will be a 
lot of work performed in the tunnels in the next month or two, and this 
will certainly stir up the dust.   

I know what processes are done there now, and I have a good idea of 
"recent" history (the past 10 years or so), but I'm not overly familiar 
with historical photography lab practices and the photography manager is 
newer here than I am.  Based on what I do know, I grabbed a sample of the 
material and will have it tested to see what might be in there and at what 
levels so we can start planning a clean-up of the area.  My question to 
the list is this:  What would you sample for?  It would be awesome to have 
that mysterious machine from CSI that can analyze molecules in seconds in 
the field, all the way down to the brand of perfume and its retailers, 
but......  I'm thinking a TCLP for metals is in order, but is there 
anything else that I should request of the lab doing the analysis?       

Thanks,
Wendy

-- 
Wendy Campbell, CSP
Occupational Health and Safety Officer
Environmental Health and Safety 
Boise State University
1910 University Drive
Boise, Idaho 83725-1826
Office: (208) 426-3303
Fax:  (208) 426-3343

Wendy,

You're correct about the TCLP, I would at a minimum expect to find silver and chromium from the photo lab and almost any metal from the metals lab, especially those used in plating.  Depending on the type of film they were processing you may also find residual organics form the color dyes.  Beyond that there may be salts of acids such as acetic and, ammonium dichromate, sulfite(s), hydroxides etc.

Fred

Fred simmons
Savannah River Nuclear Solutions

From:        Wendy Campbell <wendycampbell**At_Symbol_Here**BOISESTATE.EDU>
To:        DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Date:        12/21/2010 02:37 PM
Subject:        [DCHAS-L] Precipitate Sampling
Sent by:        DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>



Hey all,

I just ran into an interesting situation.  Some years ago, there was a plumbing leak in a pipe tunnel.  The "grey" water in the lines that leaked out originated in a photography teaching lab and a metal arts teaching lab.  After the leak was fixed, the water was simply allowed to dry in the tunnel and now there is a lot of dust left on the floor.  There will be a lot of work performed in the tunnels in the next month or two, and this will certainly stir up the dust.  

I know what processes are done there now, and I have a good idea of "recent" history (the past 10 years or so), but I'm not overly familiar with historical photography lab practices and the photography manager is newer here than I am.  Based on what I do know, I grabbed a sample of the material and will have it tested to see what might be in there and at what levels so we can start planning a clean-up of the area.  My question to the list is this:  What would you sample for?  It would be awesome to have that mysterious machine from CSI that can analyze molecules in seconds in the field, all the way down to the brand of perfume and its retailers, but......  I'm thinking a TCLP for metals is in order, but is there anything else that I should request of the lab doing the analysis?      

Thanks,
Wendy

--
Wendy Campbell, CSP
Occupational Health and Safety Officer
Environmental Health and Safety
Boise State University
1910 University Drive
Boise, Idaho 83725-1826
Office: (208) 426-3303
Fax:  (208) 426-3343

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.