From: bill parks <misterbill21225**At_Symbol_Here**YAHOO.COM>
Subject: Re: [DCHAS-L] First aid for Chemical exposures
Date: April 18, 2012 1:37:46 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <CAHGb5M2MizCvpatw1_9iaRqtVtkJxY4RHZpGuJv2CPdSmi9z8Q**At_Symbol_Here**>

We had 2 amyl nitrate kits where I worked in Chicagoland - 1 in the labs and 1 in the pilot plants. An Occ Doc prescribed them, I had to check them monthly - mostly for tampering, but also for use without reporting - and switch them out annually. In 2 1/2 years we used the kits exactly never - thank heaven. Better to have them and never use them, than to need them and not have access. You just have to make sure you secure it, check it, and maitain it.
Bill Parks
RPIH, CHST, LSP, CHMP, CEHT, CIE(pending) now LinkedIn

**Providing sound Industrial Hygiene, Occupational Health and Safety, Environmental Health & IAQ, Environmental Science, and Laboratory support services and solutions**

From: Raymond Ng <drrayng**At_Symbol_Here**GMAIL.COM>
Sent: Wednesday, April 18, 2012 1:13 PM
Subject: Re: [DCHAS-L] First aid for Chemical exposures

On the subject of first aid, what are your thoughts on having a cyanide poisoning kit on hand (amyl nitrite)?

On Wed, Apr 18, 2012 at 7:45 AM, Harry Elston <helston**At_Symbol_Here**> wrote:
So are any number of us on this list,  George.
However. I do not believe that one would need specific training for FIRST AID beyond what you find in open source literature.   Anything beyond rinse and EMS (and perhaps Ca gluconate for HF)  gets dangerously close to TREATMENT, which is beyond the scope of most.
Regarding calcium gluconate on HF,  I believe that one will find that as a first aid measure in the Honeywell HF reference booklet.
It is recognized that there are other washes available (e.g.  Diphoterine, Hexafluorine)  that are gaining traction, especially outside the US.  Alan Hall can speak more cogently about that than I can.   The peer-reviewed case studies using these solutions is mounting in a positive direction.
A couple of take home messages for first aid:
1.   Water and lots of it.
2.   Don't be a chemist on someone else's skin or eyes.  Or your own for that matter.
3.   Leave TREATMENT to the pros.  Think standard of care here.
Get your EHS group to run some exposure drills and honestly critique the outcome if you want some fun! You "can" hire it out,  but everyone still needs to be involved for it to be meaningful.
sent from my Samsung Captivate
On Apr 18, 2012 7:15 AM, "george wahl" <ghw917**At_Symbol_Here**> wrote:
Jim Kaufman would give you excellent training!

George Wahl

On Apr 17, 2012, at 9:21 AM, Humphrey, Karalyn J. wrote:

My department chair wants to have a training that specifically addresses first aid for chemical exposures.  Does anyone know of someone who might be certified/qualified to come and lead such a training?
Dr. Karalyn (Karen) Humphrey
Laboratory Coordinator, Department Safety Officer & Part-Time Lecturer
Baylor University Department of Chemistry & Biochemistry
Office: BSB E.111
Phone:  254-710-2002
"Vast worlds lie within the hollows of each atom, multifarious as the motes in a sunbeam."  ~Yoga Vasishtha

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.