From: Ralph B Stuart <rstuart**At_Symbol_Here**CORNELL.EDU>
Subject: Re: [DCHAS-L] Lab coat selection information?
Date: July 5, 2012 12:28:20 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <OF28747C46.29F6BD0A-ON85257A32.00534D1C-85257A32.0053C938**At_Symbol_Here**>

> I'm looking for guidance on lab coat selection


A semi-related question arose here recently. Has anyone developed lab-friendly protocols for developing a lab glove protocol? I'd like to go beyond references to compatibility charts to include considerations such as how often gloves should be replaced, signs of degradation to look out for etc. The idea is to provide guidance for lab supervisors who need to make specific determinations about what gloves to use when and how often they need to be replaced.


Thanks for any help with this.


- Ralph


Ralph Stuart CIH

Laboratory Ventilation Specialist

Department of Environmental Health and Safety

Cornell University




Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.