From: "George D. McCallion" <medchem**At_Symbol_Here**COMCAST.NET>
Subject: Re: [DCHAS-L] contractor safety form
Date: January 10, 2013 1:34:22 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <31F76993838DA34B8094FEA2AECF52DB11F2AF**At_Symbol_Here**>



Contractor Safety is normally addressed upon their initial site visit. This is done by training, and an SOP review followed by sign-off acknowledging their understanding of the hazards involved with their pending work site..


This is done before any work commences.




George D. McCallion

QA Reviewer, Quality and Compliance

QS Pharma, LLC

3 Chelsea Parkway, Suite 305

Boothwyn, PA 19061

Mobile: 610.888.2436

Office: 610.485.4270, ext. 245



From: "Kathryn Stolz" <Kathryn.Stolz**At_Symbol_Here**ASTELLAS.COM>
Sent: Thursday, January 10, 2013 11:21:28 AM
Subject: Re: [DCHAS-L] contractor safety form

I would also be interested in this.

-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Beth Welmaker
Sent: Thursday, January 10, 2013 10:43 AM
Subject: [DCHAS-L] contractor safety form

Does anyone have a form they can share for contractors to sign indicating that they will follow safety procedures etc. when working at your facility?



Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.