From: Jim O'Connor <oconnor.jim77**At_Symbol_Here**GMAIL.COM>
Subject: Re: [DCHAS-L] grounding and bonding of metal solvent containers
Date: Tue, 9 Sep 2014 16:54:56 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: B6117063-3AAF-422C-A55F-3122DD50B62C**At_Symbol_Here**

Grounding wires usually have a spring clamp with either serrated teeth or a single point that will bite into the top rim/edge of the drum (through the paint). The other end of the wire can have the same spring clamp for bonding or be screwed into a metal strip attached to the wall which is hard connected to a building ground. Important to check resistance periodically to make sure there is none. 

Sent from my iPhone

On Sep 9, 2014, at 3:24 PM, "Ziad N. Dabbagh" <zndabbagh**At_Symbol_Here**MINERS.UTEP.EDU> wrote:

This really depends.. What exactly are you trying to do? If you're running an electric current though something then rubber is going to be your best insulator/grounder.  As for a bonding material, this depends. You should be able to use almost any metal depending on its availability and the going rate of the metal. Just keep in mind the melting points and your safety. 

-------- Original message --------
From: "Keane J. Leitch" <kjl44**At_Symbol_Here**CORNELL.EDU>
Date:09/09/2014 8:35 AM (GMT-07:00)
Subject: [DCHAS-L] grounding and bonding of metal solvent containers

Hi ,

I am looking for guidance on the appropriate method for grounding and bonding metal solvent containers such as 55 gallon drums or 5 gallon cans?





"Individual commitment to a group effort--that is what makes a team work, a company work, a society work, a civilization work." -Vince Lombardi


Keane Leitch, MPS, CCHO, RBP

Safety Manager

Physical Sciences Facilities Management

121 baker Lab

Ithaca, NY 14850

607-255-8773 (Office)

607-255-4137 (Fax)

607-592-7079 (Mobile)

Keane.Leitch**At_Symbol_Here** kjl44**At_Symbol_Here**


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.