From: "Nguyen, Patty" <Patty.Nguyen**At_Symbol_Here**UCSF.EDU>
Subject: Re: Fwd: [DCHAS-L] [New post] Waste explosion at Texas Tech
Date: Fri, 27 Feb 2015 00:02:52 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: EDD534E34FC4AC488395F62A65BA4E0536BFCAAE**At_Symbol_Here**ex04.net.ucsf.edu
In-Reply-To


Hi Paul,

  

 Try PSI:

http://www.psix.com/products/proprietary-products/

 

-Patty

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Paul Weller
Sent: Thursday, February 26, 2015 2:39 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Fwd: [New post] Waste explosion at Texas Tech

 

Does anyone have a source for the Circumvent pressure releasing caps to fit standard 4L bottles?

 

Paul Weller

 

Paul Weller

Science Laboratory Manager-Chemistry
Elon University

2625 Campus Box

Elon, NC 27244

Phone  336.278.6225

wellerp**At_Symbol_Here**elon.edu


 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.