From: Samuella B. Sigmann <sigmannsb**At_Symbol_Here**APPSTATE.EDU>
Subject: Re: [DCHAS-L] Glassware injury lesson learned report?
Date: Fri, 3 Jul 2015 01:01:41 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 55961735.7030405**At_Symbol_Here**

My favorite is broken shards in the holes in a sink drain. They are
often the result of someone missing all the pieces of something that
broke in the sink. They make it to the drain and cannot get through the
holes of the drain and so the stick up. You often cannot see then and
they are particularly bad when the shard goes under your nail as you
reach into the drain to get something. Yes, I have done this.


On 7/2/2015 11:25 AM, Stuart, Ralph wrote:
> Does anyone have a relatively detailed favorite Lessons Learned report for a situation which involves significant cuts from broken glassware in a lab that doesn‰??t involve over-pressurization of the vessel? I‰??m doing a training next week for undergraduate students and I‰??d like to make the point that it‰??s not always the chemistry that creates the problem. The example I have in mind could involve hot glassware that breaks when someone tries to pick it up and drops it, but similar events would be helpful as well.
> Thanks for any assistance with this.
> - Ralph
> Ralph Stuart, CIH, CCHO
> Chemical Hygiene Officer
> Keene State College
> ralph.stuart**At_Symbol_Here**

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.