From: "Smallbrock, Margaret A." <Margaret.Smallbrock**At_Symbol_Here**SDSMT.EDU>
Subject: [DCHAS-L] Vacuum Chamber questions?
Date: Wed, 27 Apr 2016 16:26:46 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: e10266ea05b945c282e17ad2f35f73f2**At_Symbol_Here**

Greetings all,


I have a researcher who is proposing to build a vacuum chamber in his lab that is an evacuated tube that is 4.5 m in length and approximately 30 cm in diameter. What immediately came to mind is implosion concerns, shielding for the user, room shielding (basement lab)? Should pressure testing of the equipment be required?


If you have worked with this before or something similar, would you be willing to share? Any lessons learned or SOPs that may be helpful?


Thank you,


Margaret Smallbrock

Campus Environmental Health and Safety Manager

Environmental Health & Safety

South Dakota School of Mines

501 East St. Joseph Street

Rapid City, SD 57701-3995


605-394-5837 FAX



Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.