From: Dave Einolf <dave**At_Symbol_Here**ENDEAVOUREHS.COM>
Subject: Re: [DCHAS-L] The different between oil in water and oil and grease
Date: Tue, 10 May 2016 10:49:15 -0700
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 002901d1aae4$4698cee0$d3ca6ca0$**At_Symbol_Here**endeavourehs.com
In-Reply-To


Oil and grease (more specifically, fats, oils, and greases (FOG) is
generally a parameter applied to municipal wastewater which includes food
grade materials. There is no distinction as applied in wastewater standards
(my area) - am not sure if there are differential test methods - so not
entirely sure what you are asking.

Dave Einolf

-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of
AbdulAziz AlRueshed
Sent: Tuesday, May 10, 2016 10:34 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] The different between oil in water and oil and grease

Good night Gentlemen,

I tried my best to look for a clear definition to differentiate between oil
in water in oil industry and oil and grease as environmental parameter.

Can you please clear up this definition for me?

Best regards,
AbdulAziz AlRueshed
Saudi Aramco


Sent from my iPhone

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.