From: Bruce Van Scoy <bvanscoy**At_Symbol_Here**TWC.COM>
Subject: Re: [DCHAS-L] EXTERNAL EMAIL: Focusing on Meeting Regulations When the Focus Should BE On What Makes Sense
Date: Sat, 24 Oct 2020 17:46:45 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 01b101d6aa4f$2bb02230$83106690$**At_Symbol_Here**twc.com
In-Reply-To <1664100675.2289126.1603570011490**At_Symbol_Here**mail.yahoo.com>


Roger,

Thanks for hitting the nail on the head except for one point. I think training is accomplished to meet minimum government standards, which are based upon the lowest acceptable common denominator, compared to education where individuals are taught to apply those principles to achieve a safe outcome. This should be a simple comparison, but isn't usually. The outcome is based upon what is the expected outcome and is a night and day difference on the resulted expectations.

The difference summarizes up in are we checking a box to ensure "compliance with a minimum standard" versus actually educating personnel how to operate safely and incorporating those safety considerations in their projects.

Your absolutely right, to be successful you have to develop a culture of safety.

But before you can do that, you must convince those in authority that is what exactly what is needed, beyond simple compliance with the minimum standards.

The difference results in skirting a violation or achieving significant risk reductions with longer lasting effects.

Your right - it's culture over compliance. Compliance is relatively easy, culture takes time, effort and commitment.

The challenge remains to teach our peers to deliver the former rather than the latter.

Well said. Thank you,

BruceV

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Roger McClellan
Sent: Saturday, October 24, 2020 4:07 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] EXTERNAL EMAIL: Focusing on Meeting Regulations When the Focus Should BE On What Makes Sense

 

Protecting Individuals and Institutions.

 

To all;

 

  I would like to offer a different opinion on the issues of creating and maintaining a culture of chemical health and safety, training/education and documentation. Recall this is the DIVISION OF CHEMICAL HEALTH AND SAFETY.

 

 Why is the focus repeatedly on what are the government regulations? I start with a different premise-- as professionals I expect the senior members of this section to know based on their scientific training and experience  what is appropriate and makes sense to protect workers, the environment and institutions.

 

 I view federal , state  and local government regulations as a starting point. It is given that  these regulations and rules must be followed. However, for any particular situation I expect  individuals (be they employees , students, senior staff, Professors, independent investigators or institutional officials) to subscribe to a culture of chemical health and safety ---- of knowing what is right and  doing what is right. 

 

Why does this group so often address a health and safety issue by first asking what are the government rules and regulations. Do the individuals asking the question not know what is the right thing to do?

 

One has to start with creating and maintaining a culture of chemical health and safety. A few weeks ago  some one on this web site  raised the issue of appropriate clothing when using a glove box. One individual responded by noting he liked his casual attire. In my opinion, that response was ridiculous! I hope his studends DO NOT FOLLOW HIS EXAMPLE.  I  start with the assumption that the glove box is being used because hazardous materials are being used and the glove box is within a laboratory. I  subscribe to a view that special clothing should always be used in the laboratory. That is part of creating a culture of health and safety. Adherence to that culture is part of the privilege of working in a laboratory.

 

 I learned the importance of a  culture of health and safety and training and education and proper procedures  as a summer intern when working at the Hanford Nuclear Labs in Richland, WA in 1957. It had been  reinforced  years earlier when my father , who worked in the Hanford Chemical Separations facility, explained to me what was in the grey box that periodically appeared on the doorstep. When asked he responded -  "those are my pee bottle. I work with some hazardous materials and they check my urine to see if I have been exposed to anything bad. Some times accidents happen!" That introduced me to the use of bioassays. I later learned he worked in the PUREX operation separating Plutonium from irradiated Uranium.

 

Most recently, the discussion has focused on training and documentation of training. I was the senior official at two major laboratories, the Lovelace Inhalation Toxicology Research Institute and the Chemical Industry Institute of Toxicology. We worked with some very hazardous materials. We aspired to maintain a culture of safety and health promotion. We did a lot of training and educating, using both group sessions and individual to individual sessions.  Internal training was augmented by off-site training. 

 

Yes, we maintained records documenting training. The government agencies and private entities that funded are worked expected us to have such records. However, that is not why we maintained the records. We maintained them because you can not be operating a program of promoting health and safety if you do not have appropriate documentation ( who gave the instruction, who participated, what was the subject matter, when were the sessions held, etc). We managed our operations, they were not "happenings". Management requires documentation, records are mandatory. My Board of Directors set high standards for me and they expected me to set an example and set high standards for all our employees and operations.

 

The next time some one (your colleague, your Institute's CEO or a colleague) asks you what are the applicable government regulations  for a situation respond by asking them to explain the situation and then tell you what they think is the right thing to do  and why --- before you quote the applicable regulation.

 

Quite frankly I think as members of the Division of Chemical Health and Safety  we need to closely examine our own culture and expectations in protecting the health and safety of our co-workers and students and the Institutions we serve. 

 

Respectfully,

   Roger O. McClellan

 

On Saturday, October 24, 2020, 11:22:04 AM MDT, Wright, Mike <mwright**At_Symbol_Here**usw.org> wrote:

 

 

The problem with OSHA-mandated training isn't documentation, it's quality. Most standards that require training don't directly require documentation; Powered Industrial Trucks is an exception, but even there what gets documented is the certification that the training leads to. Nevertheless, employers almost always "document" the training so they can prove they did it. That's usually done by a sign-in sheet. But that only documents attendance. OSHA will cite if the required training wasn't done, but I've never seen a citation for poor training. In the agency's defense, it would be hard to sustain, given how subjective the judgement would be.

 

Many of our employers do very good training, and they'd do it even if OSHA didn't exist. A lot of it is designed by joint safety committees, and delivered by experienced workers - both in classroom and on-the-job. We've also designed modules on hazard communication, process safety management, accident investigation and what we call "systems of safety," which is an expansion of the hierarchy of controls.

 

Sadly, however, some employers skimp on training. We've seen cases where a 10-minute video gets teed up, during which everybody signs a sheet, and bingo-they're all trained. We once ran a little contest to find the shortest employer hazard communication training. The winner came in at a little over three minutes.

 

We're also seeing a lot of OJT training being done by inexperienced workers, either because there's high turnover or because management doesn't want to assign the more experienced and productive older workers. We call it "green training green," and it's a real problem.  

 

The Hazwoper standard at least requires minimum training hours, but it's an exception. MSHA is a lot better. New miners get a week of classroom training (except in surface stone, sand and gravel operations), and then an 8-hour refresher every year. That doesn't guarantee quality, but it helps.

 

One last point: we use the word "training" a lot, but we really prefer "education." They may be synonyms, but to us, training deals with how to do a job. Education is a more thorough grounding in why it's done that way and how that job fits into the more general process. We've had fatalities where people followed the job steps precisely, but circumstances had changed in a way they didn't fully understand.  

 

Mike

 

 

Michael J. Wright

Director of Health, Safety and Environment

United Steelworkers

 

412-562-2580 office

412-370-0105 cell

 

"My friends, love is better than anger. Hope is better than fear. Optimism is better than despair. So let us be loving, hopeful and optimistic. And we'll change the world."

                                                                                                                                                                                         Jack Layton

 

 

 

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**Princeton.EDU] On Behalf Of Monona Rossol
Sent: Friday, October 23, 2020 8:09 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: EXTERNAL EMAIL: Re: [DCHAS-L] Fwd: OSHA COVID-19 Tip of the Day for October 23, 2020

 

There are many laws like Hazcom that require documented training.  I have a list somewhere of about 15 such laws. Monona

-----Original Message-----
From: Daniel Kuespert <0000057d3b6cd9b7-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Sent: Fri, Oct 23, 2020 4:12 pm
Subject: Re: [DCHAS-L] Fwd: OSHA COVID-19 Tip of the Day for October 23, 2020

No, they cannot. As I recall, there was a court decision (OSHA v. Westvaco?) that held that OSHA cannot require any documentation not specifically asked for by a reg. The decision had to do with the Process Safety Management standard, which has specific documentation requirements, and OSHA tried to cite Westvaco for not having some docs that they weren't required by reg to have. Annoyingly, I cannot find the reference, though. Might have been OSHRC, rather than a court, but I can't find it there either.

 

Figure on it this way: if it hasn't been through public review and comment (via the Administrative Procedures Act processes), then they'd be free to require different docs of different companies, which is kind of the definition of "arbitrary and capricious."

 

Regards, Dan

Sent from my iPad

 

On Oct 23, 2020, at 15:17, DCHAS Membership Chair <membership**At_Symbol_Here**dchas.org> wrote:

=EF=BB=BF

I found today's Covid tip from OSHA odd. It's a "good idea" to document safety training? OSHA doesn't require this documentation?

 

- Ralph

 

Begin forwarded message:

 

Subject: OSHA COVID-19 Tip of the Day for October 23, 2020

Date: October 23, 2020 at 9:11:04 AM GMT-4

 

 


 

Visit OSHA's website to see more safety tips of the day.


To receive future OSHA COVID-19 safety tips of the day, subscribe online.
To opt out of receiving future tips by email, unsubscribe here


This email was sent to ralph**At_Symbol_Here**rstuartcih.org using GovDelivery Communications Cloud on behalf of: United States Department of Labor =B7 200 Constitution Ave NW =B7 Washington, DC 20210 =B7 1-866-4-USA-DOL (1-866-487-2365)

GovDelivery logo

 

Ralph Stuart, CIH, CCHO
Membership Chair
American Chemical Society Division of Chemical Health and Safety


--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.