From: Info <info**At_Symbol_Here**ilpi.com>
Subject: Re: [DCHAS-L] water reactivity of sulfuric acid solution
Date: Fri, 18 Feb 2022 13:23:58 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 226BF93D-C25D-4C67-9165-30B08344F851**At_Symbol_Here**ilpi.com
In-Reply-To


Fascinating question.


H2SO4 is a strong acid which means it will immediately dissociate in water to yield H+ and HSO4-.  It has a terrific affinity for water as we can see in common demonstrations such as sulfuric acid dehydration of sugar. Very exothermic, which is why we always add acid to water and not vice-versa.

(HSO4- is a weak acid by definition as it does not dissociate completely to H+ and SO42-, so we only need concern ourselves with the first dissociation.)

In theory, an equimolar amount of water will fully consume the H2SO4 - there will be none left and we'd have H3O+ and HSO4-. However, while we say "completely dissociates" we are being a bit glib. The Ka1 is on the order of 10^3, so that means the equilibrium lies strongly to the right, so this is an oversimplification. Regardless, the temperature spike on that would be nuts and vaporize some of the water unless this was done in a controlled fashion. So we need more water than equimolar.  But there's a lot more to this because we have to think about the enthalpy of mixing (heat of dilution). I could throw up a bunch of calculations but a more pragmatic approach is to ask if any diluted solutions of sulfuric acid are considered water reactive.

Commercial lead acid batteries have a 37% concentration. So I pulled up some random SDS's for lead acid batteries (of course, the authors may have no clue what they are taking about).  Virtually all identified water as an incompatible or noted that the material reacts violently with water. Therefore, this concentration is water-reactive.

Moving on to commercial 6 M solutions of sulfuric acid, a few SDS's mention avoid moisture, rather than listing it as incompatible, and some make no mention of any incompatibility. So, I would say this is the rule of thumb you're looking for. Of course, this is for well-behaved systems like beakers and flasks, not tubs and drums and leaks in warehouses.

Rob Toreki


Surgical grade US-Made FDA/NIOSH N95 just 64 cents each: 
https://www.safetyemporium.com/11192
NIOSH-approved N99 and N95 for $1 or less: https://www.safetyemporium.com/covid/

Safety Emporium
 - Laboratory and Safety Supplies 
https://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012


On Feb 18, 2022, at 11:07 AM, Melissa Ballard <melissa.ballard**At_Symbol_Here**MICHELIN.COM> wrote:

Can anyone help with this? I was asked to determine at what concentration would a sulfuric acid solution be considered no longer water reactive (or how dilute does it need to be)? This is in the context of storage and firefighting/fire suppression systems (Building Code for Water Reactive Materials & NFPA 704 Annex F).
 
Maybe it is a simple calculation but my brain can't handle it today. Thanks!!
 
Melissa Ballard
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.