From: Margaret Rakas <mrakas**At_Symbol_Here**SMITH.EDU>
Subject: [DCHAS-L] Low flow fume hoods?
Date: Thu, 7 Apr 2022 17:11:04 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: CAAszpkyUEzx3GPWbMR6SnBMfz=T91g3m-ifuAAV=mnDADPOSaA**At_Symbol_Here**mail.gmail.com


Good evening,

If you have experience with using low flow (60 cfm) "high performance" fume hoods such as the Hamilton Concept fume hood for neuroscience teaching laboratory classes (some standard solvents, generally used in small amounts, plus some very dilute chemicals that affect cell cycle or inhibit (work with zebrafish embryos, and over the counter drugs)--please let me know your good/bad experiences. No reactions would be taking place, amounts of waste peaking at several hundred mLs/class.

Am thinking of installing one of these as a hood for hazwaste collection-
Many thanks for passing along your history with these-
Margaret

--
Margaret A. Rakas, Ph.D.
Lab Safety & Compliance Director
Clark Science Center
413-585-3877 (p)

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.