Date: Mon, 7 Nov 2011 15:33:31 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Sender: DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu>
From: 8524828hau**At_Symbol_Here**COMCAST.NET
Subject: Test for peroxide formation
X-To: dchas-l**At_Symbol_Here**med.cornell.edu
In-Reply-To: <495339491.1626011.1320679841247.JavaMail.root**At_Symbol_Here**sz0024a.emeryville.ca.mail.comcast.net>

In response to the on-line discussion about testing for peroxide formation, I asked a conscientious colleague at Argonne National Laboratory for guidance.  The response is for only ONE person at Argonne:

From Fisher Scientific:
EM* Quant* Test Strips > Test: Peroxide; Range: 0.5 to 25ppm 

M10015-1
 Testing Supplies; Water Quality; Strips; Test; EM Quant; Test: Peroxide; Range: 0.5 to 25ppm; Ready-to-use; Detection chemicals, buffers, masking agents, stabilizers are incorporated; Supplied in sturdy aluminum cylinders

Includes: Any necessary reagents in dispenser bottles 


David Haugen
Argonne National Laboratory
(retired)

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.