From: neal**At_Symbol_Here**chemical-safety.com
Subject: Re: [DCHAS-L] Chemical Safety headlines (10 articles)
Date: Thu, 27 Jan 2022 10:55:02 -0800
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: 000a01d813af$65e683c0$31b38b40$**At_Symbol_Here**chemical-safety.com
In-Reply-To <1E9DD4DF-F715-47BB-B968-B6263DF9F89F**At_Symbol_Here**rstuartcih.org>


All
While the precision & accuracy of SDS parameters is important and must be an
ongoing concern, let's not lose sight of the impact of the original comment
in this thread.

The non-zero value for the AIT on the SDS is an alert that a dust ignition
hazard is present, regardless of the absolute value. While I have had only
limited experience with sulfur piles (one project many years ago), dust
explosion was not a hazard that come to mind as I thought about sulfur.

As you review SDSs, keep in mind that they (should) report the hazards of
the chemical or mixture. As you assess the risks, you can then evaluate
just how significant that hazard is in your specific situation.

NL

----------------------------------------------------------------------------
--------
Stay healthy and prosper

NEAL LANGERMAN, Ph.D.
ADVANCED CHEMICAL SAFETY, Inc. (Retired)
5340 Caminito Cachorro
SAN DIEGO CA 92105
+1 (619) 990-4908
www.chemical-safety.com

-----Original Message-----
From: ACS Division of Chemical Health and Safety On
Behalf Of Ralph Stuart
Sent: Thursday, January 27, 2022 10:22 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] Chemical Safety headlines (10 articles)

I really appreciate this discussion of the vagaries of measuring specific
aspects of hazard scenarios. The points raised remind me that:
1) hazards occur as part of complex systems which are difficult to describe
using simple measurements and first principles
2) risks result from the situation as much as the hazardous properties of
the starting materials
3) the value of multiple open minds participating in the risk assessment
process is often overlooked in favor of the temptation to do a calculation
to answer a risk question.

Thanks to everyone for sharing their wisdom on this event!

- Ralph

Ralph Stuart, CIH, CCHO
ralph**At_Symbol_Here**rstuartcih.org

---
For more information about the DCHAS-L e-mail list, contact the Divisional
membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.