Safety Emporium eyewashes
Safety Emporium eyewashes

Interactive Learning Paradigms, Incorporated

DCHAS-L Discussion List Archive

About This Archive  |   DCHAS-L 2017 Index   |   DCHAS-L Yearly Index   |   DCHAS-L Home Page

About This Archive

DCHAS-L 2017 Index

DCHAS-L Yearly Index

DCHAS-L Yearly Index

DCHAS-L Home Page


From: "Brown, Kimberly Jean" <kimibush**At_Symbol_Here**EHRS.UPENN.EDU>
Subject: [DCHAS-L] Last call for responses: The hot topic of hot plate malfunctions - survey link
Date: Thu, 20 Apr 2017 17:35:18 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: BN6PR10MB18280BCAAAB2A6A5B6EAF7BEE81B0**At_Symbol_Here**BN6PR10MB1828.namprd10.prod.outlook.com

Demystify: 

List friends:

 

Our survey on hot plate malfunctions ends 4/21.  If you have information to share, please be sure to respond to the survey (see below) before midnight tomorrow.

 

Thank you to all who have responded already, and also to those who reached out privately with additional information and resources!

 

Kimi Brown

(Kimi Bush)

Sr. Lab Safety Specialist

Environmental Health and Radiation Safety

University of Pennsylvania

3160 Chestnut St., Suite 400

Philadelphia, PA 19104-6287

Office: 215-746-6549

Voice/cell/text:  215-651-0557

fax: 215-898-0140

 

From: Brown, Kimberly Jean
Sent: Wednesday, April 12, 2017 12:24 PM
To: 'ACS Division of Chemical Health and Safety' <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Subject: The hot topic of hot plate malfunctions - survey link

 

[Cross-posting on ACS DCHAS list and CSHEMA Lab Safety CoP list.]

 

Joe Pickel and Mark Mathew of Oak Ridge National Labs and I (of UPenn) have teamed up to explore the insidious hazard in our midst:

Hot plate fires (and near-misses) resulting from equipment malfunctions

 

We know of events at ORNL, UPenn, Northwestern, MIT and others, and we would like to find out more, including equipment makes and models.  With a better understanding of the prevalence, equipment models, and causes of these incidents, we can define best practices for the research community, as well as, work with the equipment manufacturers to address this problem.  We are also working with the IEC Standards Committee responsible for standards related to this type of equipment.  They are open to a discussion about altering the product standard, but more data is needed to support the proposal.

 

This is where your input is essential to the effort!

 

If you have ever received a report of an electrical or electronic hot-plate malfunctions at your institution, please respond to our Google survey at the link below.  Please respond even if there were no damages as a result of the reported malfunction, and even if the reported malfunction could not be confirmed or duplicated.  Feel free to forward this survey to anyone who may be eligible to respond and is not on the DCHAS or CSHEMA listservs..

 

Survey closes April 21st.

https://goo.gl/forms/7bFUYBtuLC8nuer92

 

We will be sharing the results of the survey, however no identifying information about respondents or their institutions will be published.

 

Thank you for contributing to this effort!

 

Kimi Brown

(Kimi Bush)

Sr. Lab Safety Specialist

Environmental Health and Radiation Safety

University of Pennsylvania

 

Previous post   |  Top of Page   |   Next post