From: Sandhya Muralidharan <sandhya.muralidharan**At_Symbol_Here**STONYBROOK.EDU>
Subject: [DCHAS-L] Beryllium Monitoring
Date: Mon, 2 Apr 2018 09:05:02 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: CA+ewSAAWU-DM1pM0+CGGUO+=sNg5_1V11HtyyX1TSzQuwwtYJw**At_Symbol_Here**mail.gmail.com
Demystify:
Dear All,
We have a researcher who is planning to work with new beryllium materials using in-lab sintering technology and then characterizing those materials. My question is regarding monitoring,
* What is the monitoring method used at your institute ?
* Is monitoring performed by EHS, or third party or by lab personnel themselves ?
* If monitoring is performed by lab personnel then do they receive specific training on monitoring methods ?
---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas
The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary**At_Symbol_Here**dchas.org. The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.
