From:
000006c59248530b-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU
Subject:
Re: [DCHAS-L] Fume hood shutdown = recertification?
Date:
Jan 10, 2024 15:40 UTC
Reply-To:
ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID:
<011f01da43db$61964db0$24c2e910$@verizon.net>
In-Reply-To:
<CAAszpkx3wcGO5VcFHFHQBvh6_y9YxQafsXoGKr-k9mikFakKEg**At_Symbol_Here**mail.gmail.com>
It is a gray area. Certainly the safest and most defensible approach would be to retest the hood because something might have changed. In my experience the hood is likely to work exactly the same (plus/minus) after being turned on again if – as you say – nothing changed. My major concern would be why was it turned off for so long yet nothing changed. I would be very worried that something, somewhere in the system would have changed and so affect the performance. SO I thing retesting to certify to would be prudent but not mandatory.
Richard Palluzi
PE, CSP
Pilot plant and laboratory consulting, safety, design,reviews, and training
Linkedin Profile
Richard P Palluzi LLC
72 Summit Drive
Basking Ridge, NJ 07920
rpalluzi**At_Symbol_Here**verizon.net
908-285-3782
From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Margaret Rakas
Sent: Tuesday, January 9, 2024 10:46 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] Fume hood shutdown = recertification?
Good afternoon,
If a fume hood is 'turned off' for an extended period of time (say, 6-12 weeks) but was certified as meeting manufacturer specs for face velocity by a testing company, is it best practice/optional or required to have it recertified when it becomes operational again, assuming there are no changes (such as a fan replacement) and is within 12 months of certification? This is a continuous volume HVAC system, not integrated into a building management system...
I realize there may be concerns about backdraft, maintaining appropriate ACH in the space, etc, which we'll have to investigate but I wanted to check specifically whether institutions would recertify. (And I agree face velocity is just one measure of ability to capture fumes/vapors/mists).
Margaret
--
Margaret A. Rakas, PhD.
Lab Safety & Compliance Director
Clark Science Center
Smith College
413-585-3877 (p)
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
