Safety Emporium eyewashes
Safety Emporium eyewashes

Interactive Learning Paradigms, Incorporated

DCHAS-L Discussion List Archive

About This Archive  |   DCHAS-L 2025 Index   |   DCHAS-L Yearly Index   |   DCHAS-L Home Page

About This Archive

DCHAS-L 2025 Index

DCHAS-L Yearly Index

DCHAS-L Home Page


Previous by Date

Subject: [DCHAS-L] Fume Hood Recertification

Date: Oct 30, 2025 21:26 UTC

Author: Filiberto Palacios <00001f5128a5fa0b-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>

Next by Date

Subject: Re: [DCHAS-L] Fume Hood Recertification

Date: Oct 31, 2025 13:41 UTC

Author: Clark, Eric J <CLARKEJ**At_Symbol_Here**LATTC.EDU>

From: 000006c59248530b-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU

Subject: Re: [DCHAS-L] Fume Hood Recertification

Date: Oct 31, 2025 13:20 UTC

Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>

Message-ID: <00f601dc4a69$26edc350$74c949f0$@verizon.net>

In-Reply-To: <CANWxjW3_PFtYdgVzVR50gsgMyerUyDhuDrdGECUyGv95zww13g**At_Symbol_Here**mail.gmail.com>

Demystify: 

I encourage you to get a copy of ASHRAE 110 Method of Testing Performance of Laboratory Fume Hoods which gives recommendations for this and other fume hood measurement issues.

 

You are also welcome to contact me directly.

 

Richard Palluzi

 

Richard P Palluzi LLC

72 Summit Drive

Basking Ridge, NJ 07920

rpalluzi**At_Symbol_Here**verizon.net

908-285-3782

www.pilotplants.us

https://www.linkedin.com/in/richardppalluzillc/

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Filiberto Palacios
Sent: Thursday, October 30, 2025 5:27 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] Fume Hood Recertification

 

Good Afternoon All,

 

I am currently working on a plan to recertify fume hoods in-house and was wondering if other institutions on this Listserv would be willing to share the following: (1) how many total air velocity measurements are averaged with the anemometer of choice? Is there a minimum your institution uses? 2) is there a depth into the fume hood which should be met for all measurements or would it be sufficient to take the measurements near the face of the fume hood? (3) what other measurements or qualitative testing is done to complete the recertification process? (I’ve seen that a smoke pencil is used to visually test the functionality of the fume hood). Please advise and thank you! 

Best,

Filiberto Palacios, MPH, CPH  |  Laboratory and Research Safety Officer
Division of Academic Affairs, Department of Biology and Chemistry, Azusa Pacific University
Azusa Pacific University PO Box 7000, Azusa, CA 91702-7000
(626) 815-6072 Ext. 6072  |  apu.edu

“Do not conform to the pattern of this world, but be transformed by the renewing of your mind. Then you will be able to test and approve what God’s will is—his good, pleasing, and perfect will.” Romans 12:2

APU logo

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org

Previous post  |  Top of Page  |  Next post