Date: Fri, 2 Jun 2006 08:56:56 -0500
Reply-To: Diane Amell <Diane.Amell**At_Symbol_Here**STATE.MN.US>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Diane Amell <Diane.Amell**At_Symbol_Here**STATE.MN.US>
Subject: Re: Testing for I2 vapor
Comments: To: Carl Zipfel
FYI: The ACGIH and NIOSH limits are also ceiling.
 
- Diane Amell, MNOSHA

>>> "Carl Zipfel"  06/01/06 6:56 PM >>>

ACGIH - 0.1 ppm
OSHA 0.1 ppm TWA ceiling (1 mg/m3)
NIOSH REL 0.1 ppm
IDLH 2 ppm

For sampling methods see
http://www.osha.gov/dts/sltc/methods/inorganic/id212/id212.html

Carl Zipfel csp

----- Original Message ----- 
From: "Bob Small" 
To: 
Sent: Thursday, June 01, 2006 2:41 PM
Subject: [DCHAS-L] Testing for I2 vapor

Can anyone help me find the allowable limits for iodine (I2) vapor in
air
and methods for testing the quantities present?

Thanks for any help that you might have.

Bob Small
RS Associates
520-398-7100
520-404-2379 (cell)

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.