Date: Fri, 14 Dec 2007 14:31:52 -0500
Reply-To: Denise Dubois <ddubois1**At_Symbol_Here**UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Denise Dubois <ddubois1**At_Symbol_Here**UVM.EDU>
Subject: Low-flow Fumehoods

Does anyone have information (field studies, containment studies,  
hands-on experience, references..) regarding Fisher Hamilton's  
Concept fumehood?
 From the literature that I've reviewed it appears that this fumehood  
has comparable or better containment at the low-flow setting of 60  
FPM than standard fumehoods at 100 FPM.
I'm specifically interested in experience related to the use of  
"stench" chemicals (TEMED or beta-mercaptoethanol) in these fumehoods.

Any information would be greatly appreciated. Thanks in advance.


Denise DuBois
Laboratory Safety Coordinator
Environmental Safety

University of Vermont
McAuley Hall - Room 103
250 Colchester Avenue
Burlington, VT  05401
802-656-3321(phone)
ddubois1**At_Symbol_Here**uvm.edu(email)

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.