Date: Mon, 24 Nov 2008 08:09:22 -0500
Reply-To: suzanne <suzanne**At_Symbol_Here**POLYMERSOLUTIONS.COM>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: suzanne <suzanne**At_Symbol_Here**POLYMERSOLUTIONS.COM>
Subject: ICP-OEMS
In-Reply-To: <010201c94b91$2a163790$7e42a6b0$**At_Symbol_Here**com>
Does anyone have a safety procedure they wouldn't mind sharing for using an
ICP-OEMS? Or can direct me to where I can find information on any hazards
for working with an ICP-OEMS. 

Suzanne Hamm

Safety Manager

Polymer Solutions Incorporated

2903C Commerce Street

Blacksburg, Virginia 24060

(540) 961-4300 x (201), phone

(540) 961-5778, fax

www.PolymerSolutions.com , web-site

 

Polymer Solutions Incorporated is ISO/IEC 17025 accredited, FDA Registered,
and DEA Licensed.

 

PROPRIETARY NOTICE

This e-mail and its attachments contain proprietary information that is
intended only for the individual or entity indicated.  If you are not the
intended recipient, you are hereby notified that the disclosure, copying,
distribution or use of the contents of this transmission is strictly
prohibited, and no privilege or protection has been waived.  If you have
received this communication in error, please notify the sender immediately
and then delete the message from your computer.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.