Date: Tue, 6 Jan 2009 07:11:41 -0600
Reply-To: Suzanne Hamm <suzanne**At_Symbol_Here**POLYMERSOLUTIONS.COM>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Suzanne Hamm <suzanne**At_Symbol_Here**POLYMERSOLUTIONS.COM>
Subject: HF Response
In-Reply-To: <48A020E1942E024DB0F2A6B68A13124403ED899157**At_Symbol_Here**>

Does anyone have a procedure for response to an HF exposure or safety guide
lines for use of HF? Some of our chemists like to use this to clean glasswa
re when nothing else will work. We have some guidelines in place now but wo
uld like to make sure everything is covered. 

Thank you,

Suzanne Hamm

Safety Manager

Polymer Solutions Incorporated

2903C Commerce Street

Blacksburg, Virginia 24060

(540) 961-4300 x (201), phone

(540) 961-5778, fax , web-site


Polymer Solutions Incorporated is ISO/IEC 17025 accredited, FDA Registered,
 and DEA Licensed.



This e-mail and its attachments contain proprietary information that is int
ended only for the individual or entity indicated.  If you are not the inte
nded recipient, you are hereby notified that the disclosure, copying, distr
ibution or use of the contents of this transmission is strictly prohibited,
 and no privilege or protection has been waived.  If you have received this
 communication in error, please notify the sender immediately and then dele
te the message from your computer.

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.