We are looking for some ideas on hood sash cables:

 

We inspect all our hood sash cables quarterly by a visually inspecting the cable and running a finger along the cable to feel for any bumps or frayed wire.  We use 3/32” stainless steel “aircraft grade” cables with a rating of 900 pounds.  We have found wire that has frayed in the middle of the twist and it is not visible without a magnifying glass, and if it were to give away while someone was in the hood, we would have a serious injury.  We are thinking about instituting a change schedule for all the cables. Does anyone have any ideas or comments?    

 

Does anyone have any information on cable breakage, or has anyone heard of an incident of both sash cables breaking at the same time causing the sash to completely fall?

 

Does anyone have a policy they would be willing to share?

 

---------------- -----------------------------------

R.J. Wolcik

Environmental Health and Safety

Strem Chemicals, Inc.

7 Mulliken Way, Dexter Industrial Park

Newburyport, MA 01950-4098, U.S.A.

Telephone: 978.499.1660

Fax: 978.499.1661

Email: rj**At_Symbol_Here**strem.com

www.strem.com

---------------- ----------------------------------

Confidentiality Notice: This e-mail transmission may contain confidential or legally privileged information that is intended only for the individual or entity named in the e-mail address. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or reliance upon the contents of this e-mail is strictly prohibited. If you have received this e-mail transmission in error, please reply to the sender, so that Strem Chemicals Inc. can arrange for proper delivery, and then please delete the message from your Inbox. Thank you.