Date: Wed, 20 Oct 2010 16:38:26 -0700
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: K Roy <safesci**At_Symbol_Here**SBCGLOBAL.NET>
Subject: Re: Lab safety showers
In-Reply-To: <9FAC8FEB-8133-4AB5-B767-E5A498C557EB**At_Symbol_Here**>
Celia - OSHA requires the employer to meet the recommended flushing frequency of the manufacturer.  In most if n ot all cases, this means weekly flushing and a log verifying that is w as done, when and by whom.
Ken Roy
Kenneth R. Roy, Ph.D.
Directo r of Environmental Health & Safety
Glastonbury Public Scho ols (CT);
Science Safety Compliance Consultant/Columnist/Edito r/Author
National Science Teachers Association;
A uthorize OSHA instructor 

From: List Moderator <ecgrants **At_Symbol_Here**UVM.EDU>
To: DCHAS-L **At_Symbol_Here**LIST.UVM.EDU
Sent: Wed, October 20, 2010 7:21:31 PM
Subjec t: [DCHAS-L] Lab safety showers

From: "Celia K. Williams" <ckv ibe**At_Symbol_Here**>
Date: October 20, 2010 7:19:40 PM EDT
Subject: Re: [DCHAS- L] Lab safety showers

Has anyone re cently installed safety showers in their labs? Do you
have any tips you may share. We are following the ANSI standa rd but
are there are recent guidelines?< /DIV>

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.