From: Ronald Andrus <andrusrd**At_Symbol_Here**SBCGLOBAL.NET>
Subject: Re: [DCHAS-L] Overspray from screen print cleaning
Date: January 28, 2012 5:27:24 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <b5126603-c07d-4879-b9bb-4821a3ef3760**At_Symbol_Here**ganesh.brynmawr.edu>


I have concern with the following statement that you made "The cleaning process occurs in the shop in a large, stainless steel sink, installed against one wall in the shop.  The sink is fitted with a solids trap.  All of the emulsions, inks and strippers are water-based, don't have any hazardous materials in them and are allowed to go down the drain."  I am the Chemical Hygiene Officer for a paint manufacturing company.  Our company desired to discharge some non-hazardous waterborne waste into the sewage system.  Our company was advised by the city that to dump the water directly into the sewer system our company must have the representative material analyzed by an outside firm.  The analysis would be submitted to the sewage treatment agency for approval.  If approved for discharge to the sewer system, our company would receive a permit to do so.  Then periodically our company would have to do random testing to confirm that the same quality of discharge water was the same.  A retail consumer is permitted to directly discharge to the sewer system.  As a business any waste that is generated by any of your business processes is considered industrial waste.  Violation can lead to fines which especially in California can add up quick.
 
Very Respectfully,
Ron Andrus
Chemical Hygiene Offcier
Matrix System Automotive Finishes, LLC
 
From: Don Abramowitz <dabramow**At_Symbol_Here**BRYNMAWR.EDU>
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Sent: Friday, January 27, 2012 11:33 PM
Subject: Re: [DCHAS-L] Overspray from screen print cleaning

Assuming the overspray is simply a nuisance and local exhaust is truly unnecessary, perhaps you could place particulate filters over the return air intakes.  This could be as crude as taping air handler, furnace, or paint booth overspray filters over the openings, or having metal filter holders installed over the intake to make filter changes easy.  Could even add magnehelic guages to monitor the differential pressure to know when it's time to change the filters.   This should keep the material out of the system, as long as there are no volatiles involved that would be a concern if they passed through or  evaporated off the filters and were drawn into the system.

                                               Don

Donald Abramowitz, CIH
Environmental Health & Safety Officer
Bryn Mawr College
Bryn Mawr, PA


Please excuse the cross-postings - I need to cast a wide net.
 
Our Design department has moved into new digs in a renovated older building (early 1960's vintage).  It has a return air system with openable windows.
 
In the screen printing shop, they treat the screens with an emulsion and various inks to form the image.  After they develop the image and use the screen, the dried ink and emulsion need to be removed from the screen.  They use a stripper and power washer to clean the screens.  The cleaning process occurs in the shop in a large, stainless steel sink, installed against one wall in the shop.  The sink is fitted with a solids trap.  All of the emulsions, inks and strippers are water-based, don't have any hazardous materials in them and are allowed to go down the drain.
 
But the cleaning process puts water spray and particulate into the air - in a return air building - and my shop manager is concerned about occupant exposure and contamination of the supply air from the overspray.  Adding exhaust ventilation isn't possible, for a variety of reasons.  Cleaning the screens outside isn't possible either, as there are strict storm drain rules in California.  There haven't been any complaints yet but they just moved into the space last quarter.
 
Any ideas?  I'm fresh out.
 
Thanks,
Debbie
--------------------------------
 
Debbie M. Decker, Campus Chemical Safety Officer
Environmental Health and Safety
University of California, Davis
1 Shields Ave.
Davis, CA  95616
(530)754-7964/(530)681-1799 (cell)
(530)752-4527 (FAX)
dmdecker**At_Symbol_Here**ucdavis.edu
Co-Conspirator to Make the World A
Better Place -- Visit www.HeroicStories.com and join the conspiracy
 
 


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.