From: ILPI <info**At_Symbol_Here**ILPI.COM>
Subject: Re: [DCHAS-L] Safety shower / eyewash temperature regulations
Date: January 31, 2012 2:09:39 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <030EC7F46EB9004F88C4D5EDAB1EFE33016CB0D9**At_Symbol_Here**EMPEXCHANGE.rvc.local>

This has been discussed many times on this list.  Pop over to the DCHAS archives and search on "tepid water".  The archives are located at and

Rob "Hmm, somehow I became de facto Keeper of the DCHAS-L  Archives™" Toreki

Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at
esales**At_Symbol_Here**  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

On Jan 31, 2012, at 12:58 PM, Darrell Ulven wrote:

I was wondering if someone could lead me in the right direction. I am being asked for information about the correct temperature range for new installations of safety shower / eyewash systems for a college lab. Could someone possibly give me a link to the correct regulation? Your assistance would be greatly  appreciated.
Darrell Ulven
Remember - "To the World You May Be But One Person,
But to One Person You Are the World"
Instructional Technician
Physical Sciences

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.