From: "George D. McCallion" <medchem**At_Symbol_Here**COMCAST.NET>
Subject: Re: [DCHAS-L] explosion proof blender
Date: May 31, 2012 5:21:57 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <4CB9A51AE5B8C44BA13375C794CBA29A02BE81B0**At_Symbol_Here**>

Yung, You might want to look towards Cole-Parmer

Their technical support might assist You.


George D. McCallion
124 Magnolia Court
Collegeville, PA 19426

Voice: 610.888.2436

From: Yung Morgan <pmorgan**At_Symbol_Here**EHS.UMASS.EDU>
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Date: Thursday, May 31, 2012 3:03 PM
To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Subject: [DCHAS-L] explosion proof blender

Dear safety colleagues,


Hope the summer is finding you well. A professor at my school is looking for an intrinsically safe(or explosion proof) grinder /blender that he could use to blend  small pieces of plastic in solvent( MEK, chloroform etc.), small enough  to be left  inside the fume hood. I was wondering if any of you have come across such equipment and/or manufacturer you would recommend.


Thank you very much for any thoughts you may have. Enjoy your Summer.


Yung Morgan, MsPH
Laboratory Safety
Industrial Hygiene Services
Environmental Health and Safety
117 Draper hall
UMASS,Amherst MA 01003
phone (413)  545-2682
Fax  (413) 545-2600
email : pmorgan**At_Symbol_Here**


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.