From: Yung Morgan <pmorgan**At_Symbol_Here**EHS.UMASS.EDU>
Subject: [DCHAS-L] working with nanomaterial
Date: October 2, 2012 9:00:08 AM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <4CB9A51AE5B8C44BA13375C794CBA29A8DA6D7E222**At_Symbol_Here**>

Dear  members,


   Does anyone have a source on  a containment system  for  safely weighing  dry nanomaterial?   A chemical hood is usually too turbulent for the accuracy of a Mettler balance.  Any thought you have including precaution(s) to take for this type of  work would be appreciated.  


Thank you and keep up the great work you do.


Yung Morgan, MsPH
Laboratory Safety
Industrial Hygiene Services
Environmental Health and Safety
117 Draper hall
UMASS,Amherst MA 01003
phone (413)  545-2682
Fax  (413) 545-2600
email : pmorgan**At_Symbol_Here**


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.