From: Ken Simolo <simolo**At_Symbol_Here**CHEM.CHEM.ROCHESTER.EDU>
Subject: Re: [DCHAS-L] Advice on our new science building
Date: October 13, 2012 2:43:22 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <B2C0C27B26CA4916B48190AE799E6023**At_Symbol_Here**hplap>

One of the sensors in the Green Hoods is a wet cell that I believe is used for measuring acidic gases.  It has a PM schedule for being replaced every 2 years.


On Oct 12, 2012, at 9:41 PM, Ed Huffman wrote:

Are there electronic sensors for acid gasses.  We are using Dragger tubes to check for breakthrough and would like a continous sensor.\

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.