From: Laura Damon <ldamon**At_Symbol_Here**FVCC.EDU>
Subject: Re: [DCHAS-L] lab remodel with chemical safety in mind
Date: October 19, 2012 5:01:20 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <CAHoE6joK-d7kOxrPxzTZkzV-g9TXMhRee7mGHpRcm87Jeg3v9g**At_Symbol_Here**mail.gmail.com>


On a similar note, when we remodeled our chemistry labs the project engineer decided we didn’t need hot water in the labs so didn’t provide anyL  We had to install instant hot water heaters under each bench.  Ditto not only on communication needs but check on what they are actually doing.

 

Laura Damon

Flathead Valley Community College

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ferm, Barret
Sent: Friday, October 19, 2012 11:12 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] lab remodel with chemical safety in mind

 

We are in the throws of shaking down a new chemistry lab from a remodel last summer. This comment is more sanity-related than safety related, but important for the function of your new lab space: Make sure your electrical system designers and contractors know your "worst case scenario" power needs. For example, yesterday - the first time we went to use hot plates in our new lab - the breakers tripped for all the benches.  (This occurred despite the distant memory that we told the architect how many hot plates we use and their draw.)  On top of that, the breaker locations were not made known to us users, nor were the circuit breakers in the box labeled. The lab had to be cancelled.

So, communicate, early and often, how many hot plates (or other high-draw equipment) you will be using at one time, and their electrical draw.  And when you get back into your space, test your "worst case scenario" ahead of time.

Barry Ferm

Ba Fm

"Kindness in words creates confidence. Kindness in thinking creates profoundness. Kindness in giving creates love." - Lao Tzu


On Fri, Oct 19, 2012 at 11:29 AM, Strode, Kyle <strode**At_Symbol_Here**carroll.edu> wrote:

We are in the planning stages for a remodel of an existing engineering lab into a chemistry undergraduate research laboratory. How should the room be outfitted in terms of chemical safety considerations?

 

We are thinking

-          ABC Fire extinguisher (do we need a D?)

-          Eyewash stations at each sink

-          Shower just outside the door (already in place)

-          First aid box on wall

-          Fire blanket

 

What are we missing?

 

Kyle Strode

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.