DCHAS-L Discussion List Archive
From: "Erik A. Talley" <ert2002**At_Symbol_Here**MED.CORNELL.EDU>
Subject: Re: [DCHAS-L] perchloric acid fume hoods
Date: March 2, 2013 9:07:24 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <8AF66AD7-1147-42F8-BD87-FC0B565F420B**At_Symbol_Here**yale.edu>
It was Oak Ridge National Labs. There is a lot of information out there from ORNL on this topic, including:
I recall an excellent presentation, years ago, from folks at from a large government lab who discovered this problem for many of their labs and came up with a good approach. This was part of a DivCHAS program at an ACS national meeting. Perhaps someone
can remember the specifics, or if it was written up in JCHAS. -- Pete Reinhardt, Yale EHS
On Mar 1, 2013, at 9:18 PM, "Lanza, Mary Beth" <
MaryBeth.Lanza**At_Symbol_Here**WEYERHAEUSER.COM> wrote:
Does anyone have experience with the removal of perchloric acid hoods from a lab? Any information on the subject and references to resources capable of performing this task would be greatly appreciated. I do realize there is a special
procedure and tremendous cost associated with this, but I wanted to get a better idea of specifically what is involved.
Thank you.
Mary Beth Lanza
Scientist - Infrared Spectroscopy
Weyerhaeuser Analytical Chemistry
WTC Chemical Hygiene Officer
mary-beth.lanza**At_Symbol_Here**weyerhaeuser.com
(253) 924-6013 (desk)
(253) 924-6290 (lab)
(253) 924-6654 (fax)
Need to request testing services? Want to know more about Analytical Chemistry & Microstructure? Visit us at:
http://wss.weyer.com/sites/acm/default.aspx
Previous post | Top of Page | Next post
