DCHAS-L Archives, Mar 27 2013 - [DCHAS-L] Stirrer Hot Plates

DCHAS-L Discussion List Archive

Previous by Date:
Subject: Re: [DCHAS-L] Training program feedback survey?
Date: March 27, 2013 12:39:17 PM EDT
Author: "Nail, John"

Next by Date:
Subject: Re: [DCHAS-L] Training program feedback survey?
Date: March 27, 2013 1:02:01 PM EDT
Author: Kennedy, Sheila

From: "BIALKE, THOMAS" <tbialke**At_Symbol_Here**KENT.EDU>
Subject: [DCHAS-L] Stirrer Hot Plates
Date: March 27, 2013 12:49:01 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <6424891665D5D6458A1FABB209925C2C28E38554**At_Symbol_Here**BL2PRD0811MB421.namprd08.prod.outlook.com>

Demystify:

What is your policy on heating or mixing flammable liquids with non-explosion proof, not spark proof stirrer hot plates?

Tom Bialke, MSPH, CIH

Mgr. Research Safety and Compliance

Kent State University

Previous post | Top of Page | Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary**At_Symbol_Here**dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.

Interactive Learning Paradigms, Incorporated

DCHAS-L Discussion List Archive