From: Naomi Kelly <nkelly**At_Symbol_Here**CLEMSON.EDU>
Subject: Re: [DCHAS-L] Stirrer Hot Plates
Date: March 27, 2013 4:45:14 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <CAK9FruLN4WhtMq94q77SwHFJAB1QWL81b8vKh9_R5RiR7Bay=A**At_Symbol_Here**>

It is our policy, if they are not intrinsically safe for use with flammables( most are not) , to post them "DO NOT USE….". 
Naomi Kelly
Research Safety
Chemical/Lab Safety
500 Daniel Dr.
(864) 650-8155

From: Joan Geary <joangeary.99**At_Symbol_Here**GMAIL.COM>
Reply-To: "DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU" <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Date: Wednesday, March 27, 2013 2:40 PM
Subject: Re: [DCHAS-L] Stirrer Hot Plates

In our lab, it is absolutely forbidden.
On Mar 27, 2013 1:49 PM, "BIALKE, THOMAS" <tbialke**At_Symbol_Here**> wrote:
> What is your policy on heating or mixing flammable liquids with non-explosion proof, not spark proof stirrer hot plates?
> Tom Bialke, MSPH, CIH
> Mgr. Research Safety and Compliance
> Kent State University

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.