From: Ken Simolo <simolo**At_Symbol_Here**CHEM.CHEM.ROCHESTER.EDU>
Subject: Re: [DCHAS-L] Temperature Setbacks in Labs
Date: March 28, 2013 5:00:32 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <1677852553957F45BA7188EE44766EB3A75B99D2A4**At_Symbol_Here**>

We adjust air exchanges using occupancy sensors but not temperature.


On Mar 28, 2013, at 4:19 PM, Brennan, Catherine (Environment Health & Safety) wrote:

Does anybody do temperature setbacks in research labs when unoccupied =96 specifically with the use of occupancy sensors?  I know our research labs are occupied at all times and days of the week but curious if anybody has done this with occupancy sensors and how it has worked out.  Thanks!
Catherine R. Brennan
Chemical Hygiene Officer
Environment, Health and Safety
University of North Carolina at Chapel Hill
1120 Estes Drive Extension, CB#1650
Chapel Hill, NC  27599-1650
(919) 843-5331
(919) 962-0227 FAX

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.