From: Leogane Olivier <o.leogane**At_Symbol_Here**UMONTREAL.CA>
Subject: [DCHAS-L] Laser lab design - Vibration concerns
Date: June 18, 2013 9:37:39 PM EDT
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <74A314CC177D5242BE272584CE0555C4011532E5**At_Symbol_Here**MAPIUDEM2.sim.umontreal.ca>

Hi all,

Any of you know the vibration criteria used in their building? Depending on the type of research,
for example, if you are using laser or vibration sensitive equipment, which vibration criteria has been chosen?
And more importantly, why is this level have been chosen? Is it better, regarding you experience, to have a building
with low-level of vibration or to buy a better optic table (cost vs effectiveness)

Best regards,

__________
Olivier Leogane, Ph.D.
EHS Officer, Chemical safety
University of Montre´al
Tel: 514-343-6111 ext 2824

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.