From: Mark Lee <mleesafety**At_Symbol_Here**YAHOO.COM>
Subject: Re: [DCHAS-L] laminar flow hood purchase
Date: Thu, 7 Nov 2013 10:33:53 -0600
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 0CF53C56-7F62-4BBD-9486-854DCFA2A144**At_Symbol_Here**
In-Reply-To <9F3B003643FC5F42930EFB83E276C8600252C434FF6A**At_Symbol_Here**HNXEXCH.hendrix.local>


From what I have seen, the Laminar Flow Hoods are one of the best on the market. Performing Lockout/Tagout audits, I see a lot of the bench top vertical models. Here is a link for your viewing.

I hope this helps you out.


Mark C. Lee
Safety Manager Specialist
Lockout/Tagout Specialist

> On Nov 7, 2013, at 10:11 AM, "Bradley, Shelly" wrote:
> One of my faculty is interested in a laminar flow hood. I know nothing about them.
> What do I need to know?
> Are the self-contained ones any good?
> Which brands are best?
> Thanks for your help!!
> Shelly Bradley
> Authorized OSHA Trainer
> Instrumentation Specialist
> Laboratory Development Assistant
> Campus Chemical Compliance Director
> Department of Chemistry
> Hendrix College
> Conway, AR 72032
> Ph: (501) 450-3812
> Fax: (501) 450-3829
> bradley**At_Symbol_Here**

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.