Do know what they want it for? Depending on what they are wanting it for would potentially determine what would be recommended.
For example, if it were for potent compound handing/weighing I would look into a FlowSciences powders weighing cabinet. Again, it really depends on what they need the hood for.
Patty Olinger, RBP
Director, Environmental, Health, and Safety Office
1762 Clifton Rd.
Atlanta, GA 30322
From: DCHAS-L Discussion List [dchas-l**At_Symbol_Here**MED.CORNELL.EDU] on behalf of Mark Lee [mleesafety**At_Symbol_Here**YAHOO.COM]
Sent: Thursday, November 07, 2013 11:33 AM
Subject: Re: [DCHAS-L] laminar flow hood purchase
From what I have seen, the Laminar Flow Hoods are one of the best on the market. Performing Lockout/Tagout audits, I see a lot of the bench top vertical models. Here is a link for your viewing.
I hope this helps you out.
Mark C. Lee
Safety Manager Specialist
________________________________ This e-mail message (including any attachments) is for the sole use of If you have received this message in error, please contact Previous post | Top of Page | Next post
> On Nov 7, 2013, at 10:11 AM, "Bradley, Shelly"
> One of my faculty is interested in a laminar flow hood. I know nothing about them.
> What do I need to know?
> Are the self-contained ones any good?
> Which brands are best?
> Thanks for your help!!
> Shelly Bradley
> Authorized OSHA Trainer
> Instrumentation Specialist
> Laboratory Development Assistant
> Campus Chemical Compliance Director
> Department of Chemistry
> Hendrix College
> Conway, AR 72032
> Ph: (501) 450-3812
> Fax: (501) 450-3829
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).
This e-mail message (including any attachments) is for the sole use of
If you have received this message in error, please contact
Previous post | Top of Page | Next post