From: Evan Parnell <e.f.parnell**At_Symbol_Here**GMAIL.COM>
Subject: Re: [DCHAS-L] laminar flow hood purchase
Date: Fri, 8 Nov 2013 09:29:13 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAE3sdF_vY=qJiw2-ao1tfpf4kT05Noc=oPj2qduA0CEz=GLNNw**At_Symbol_Here**mail.gmail.com
In-Reply-To


Ladies and Gentlemen,


I really don't know how I got involved in this email chain, but I work for a company that certifies laboratory equipment, specializing in HEPA filtered environments. Based on the previous discussion, I see no incorrect information, but it has gotten a bit beyond answering your question directly. Based on your needs, a flow bench (which offers product protection only) seems to be the right fit for your needs.


The following link has a good explanation of clean bench theory: http://www.bakerco.com/intro-to-biological-safety-cabinets/intro-to-clean-benches.html. There are dozens of companies that make such equipment, as well as a few websites where you can purchase used equipment. Just be aware of the required certification cycles based on the specifications you work under. If you have any further questions, please contact me via the information below. I hope this helps you in your search.



Very respectfully,

Evan F. Parnell

Technical Specialist

Atlantic Technical Systems

efparnell**At_Symbol_Here**atscert.com

c: 443.223.3828

f: 410.729.0119



On Thu, Nov 7, 2013 at 3:32 PM, Russell Vernon <russell.vernon**At_Symbol_Here**ucr.edu> wrote:

These kinds of laminar flow hoods are also known as clean benches.

Not intended for employee protection

Make sure the plastic (I recommend Polypropylene) of which it is made will meet the local fire authority flame spread index requirements. Nothing like a BIG chunck of plastic to get a fire really going….

Russell Vernon, Ph.D.
Director
Environmental Health & Safety
University of California, Riverside
900 University Ave
Riverside, CA 92521
www.ehs.ucr.edu
russell.vernon**At_Symbol_Here**ucr.edu
Direct (951) 827-5119
Admin (951) 827-5528
Fax (951) 827-5122

Taking a trip overseas?

Access Location Intelligence: https://ermsp.ucop.edu/uctrip and enter your UC Net ID

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Bradley, Shelly
Sent: Thursday, November 07, 2013 9:03 AM


To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] laminar flow hood purchase

Okay. That was my Duh! moment for the day. Of course I needed more details and I have them.

We need the laminar flow cabinet to provide bacteria free and metal free air for working with phytoplankton. So it is biological, but we aren't working with anything that is a biohazard. There also will not be anything hazardous, so outside exhaust is NOT needed. (There is a traditional fume hood in this space already.)

Shelly Bradley

NRCC-CHO

Authorized OSHA Trainer
Instrumentation Specialist
Laboratory Development Assistant
Campus Chemical Compliance Director
Department of Chemistry
Hendrix College
Conway, AR 72032
Ph:
(501) 450-3812

Fax: (501) 450-3829
bradley**At_Symbol_Here**hendrix.edu

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Margaret Rakas
Sent: Thursday, November 07, 2013 10:33 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] laminar flow hood purchase

Shelly,

Does the user need protection? Are they going to be working with infectious bioorganisms and/or human cells? A laminar flow hood won't protect the user, only the product. If they will be working with infectious materials a biosafety cabinet (rather than a 'laminar flow hood') provides both product protection and user protection. It has laminar flow...

In case you need a BSC, below is the link to get the Appendix A from the BMBL. (I can't attach the pdf).

We have both IIA2 (the majority) and IIB1 (a few). I am perfectly comfortable with the IIA2's (which discharge into the room) as long as they are for BSL2 work and are certified annually or when moved.

let me know if you'd like to talk further.

Margaret

On Thu, Nov 7, 2013 at 11:11 AM, Bradley, Shelly <Bradley**At_Symbol_Here**hendrix.edu> wrote:

One of my faculty is interested in a laminar flow hood. I know nothing about them.
What do I need to know?
Are the self-contained ones any good?
Which brands are best?

Thanks for your help!!

Shelly Bradley
NRCC-CHO
Authorized OSHA Trainer
Instrumentation Specialist
Laboratory Development Assistant
Campus Chemical Compliance Director
Department of Chemistry
Hendrix College
Conway, AR 72032
Ph: (501) 450-3812
Fax: (501) 450-3829
bradley**At_Symbol_Here**hendrix.edu



--
Margaret A. Rakas, Ph.D.
Manager, Inventory & Regulatory Affairs
Clark Science Center
413-585-3877 (p)


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.