From: Kathy Rusniak <kathy**At_Symbol_Here**NANO-CYTOMICS.COM>
Subject: Re: [DCHAS-L] low pressure spraying of potentially biohazardous materials
Date: Thu, 10 Apr 2014 13:06:26 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CA+up-wVQ3tjvT-ify6KOuovcCLVDTFeK9HVc=vYO1CNqP_T=TQ**At_Symbol_Here**
In-Reply-To <2A9BE537-B8FA-42C6-A2D6-CBB6DD227DEE**At_Symbol_Here**>

Hi Patty,

I'm trying to determine whether spraying pobio materials as a testing/mfg process would present any significant health risk or require any specific containment device due to possible aerosolization of viral particles (Hepatitis, HIV, etc).


Kathy Rusniak
Research Engineer
Evanston, IL 60201

On Thu, Apr 10, 2014 at 12:16 PM, Olinger, Patricia L <patty.olinger**At_Symbol_Here**> wrote:
Hi Kathy, what specifically are you looking for?


Sent from my iPad

> On Apr 10, 2014, at 1:08 PM, "Kathy Rusniak" <kathy**At_Symbol_Here**NANO-CYTOMICS.COM> wrote:
> Hello,
> I'm researching the hazards and regulations governing the spraying of potentially biohazardous materials. So far I'm finding that aerosolization of pobio liquids is not considered a likely route of distributing viral particles (Hepatitis, HIV, etc), at least regarding existing technologies (such as dialysis) that have been studied. Does anyone have experience with this issue or know of specific regulations or sources of information that relate to this issue?
> Thank you,
> Kathy

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.