From: Beth Shepard <Beth.Shepard**At_Symbol_Here**SIAL.COM>
Subject: Re: [DCHAS-L] Broken glass
Date: Tue, 19 Aug 2014 08:36:36 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAA8P=MQpf-vewpFKeEFoCrNqzr6evhd+cyP6-07sDuvgtbZvZQ**At_Symbol_Here**mail.gmail.com
In-Reply-To <0i9n4w6s64gbjk4oijeim60t.1408058563732**At_Symbol_Here**email.android.com>


Hello all--

Sigma-Aldrich has glass disposal boxes, both floor & benchtop sizes.

Z207179 (floor model) 12 in. x 12 in. x 27 in.
Z207187 (benchtop model) 8 in. x 8 in. x 10 in.

Beth





On Thu, Aug 14, 2014 at 6:22 PM, Kennedy, Sheila <s1kennedy**At_Symbol_Here**ucsd.edu> wrote:
Our 'system' is very like this one. We can leave them in the hall for pickup but we usually move them to the dumpsters ourselves.

Sheila Kennedy, C.H.O.
UCSD Chemistry & Biochemistry



-------- Original message --------
From: bcutlip**At_Symbol_Here**SUDDENLINK.NET
Date: 08/14/2014 2:46 PM (GMT-08:00)
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] Broken glass


Lisa,
We use the large "floor model" cardboard broken glass boxes from Fisher Scientific. Each box has a heavy mil. plastic bag liner.
Bldg. services does not like to handle them and they have also asked us not to fill them more than 1/2-2/3 full because of weight. When they are filled to this level we close, twist, and tie off the bag, place the cardboard lid on the box, and then wrap all the way around the box with packing tape to keep it closed.
Someone from our lab or our work study lab assistants will dolly the boxes down to a designated pick up area. The reason for not filling to capacity has to do with the weight being excessive when the trash handler then picks up the container for disposal.

Becky

---- Lisa Phillips <bognar.6**At_Symbol_Here**ND.EDU> wrote:
> Our building services personnel are beginning to have issues with the
> broken glass boxes that are used around campus, but specifically within
> labs. I have been asked to reach out and see how others are handling it.
> I have posed three questions. You can send your responses to me directly.
>
>
> What type of containers do you use for broken glass?
> Are there written procedures regarding weight, labeling and sealing?
> Who picks up broken glass containers at your institution?
>
> Thanks is advance.
>
> Lisa
>
>
> --
>
> *Lisa Bognar Phillips, CHMM, CCHO*
>
> *Laboratory Compliance Program Manager*
>
> *University Biosafety Officer*
>
> *University of Notre Dame*
>
> *636 Grace Hall*
>
> *Notre Dame, Indiana 46556*
>
> *Phone: 574-631-5037*
>
> *Email: bognar.6**At_Symbol_Here**nd.edu <bognar.6**At_Symbol_Here**nd.edu>*


This message and any files transmitted with it are the property of Sigma-Aldrich Corporation, are confidential, and are intended solely for the use of the person or entity to whom this e-mail is addressed. If you are not one of the named recipient(s) or otherwise have reason to believe that you have received this message in error, please contact the sender and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.