From: Kim Gates <kim.gates**At_Symbol_Here**STONYBROOK.EDU>
Subject: [DCHAS-L] Lab ventilation & hazard assessment
Date: Mon, 10 Nov 2014 11:50:02 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: CAA4EBLsUYUwjaQo8csg1Du=_C1HrjC60tQi48Sia8pBdh781JQ**At_Symbol_Here**

I posted this awhile ago & haven't heard - thought I'd try again.

Does anyone have a good method for documenting the ductless hood ANSI Z9.5 requirement for a "hazard evaluation & analysis conducted as directed in ANSI/AIHA Z9.7 and SEction"?

Does anyone have a written guide to evaluate lab work & decide when a fume hood is required?


Kim Gates
Laboratory Safety Specialist
Environmental Health & Safety
Stony Brook University
Stony Brook, NY 11794-6200
FAX: 631-632-9683
EH&S Web site:

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.