From: ILPI Support <support**At_Symbol_Here**>
Subject: Re: [DCHAS-L] Fuel gases and gas blowing operations
Date: Mon, 2 Mar 2015 15:26:11 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 75B73CBD-899E-40DE-99BF-664C71DAB4EF**At_Symbol_Here**

Check out the Scientific Glassblowing Learning Center, and other material therein.   Disclaimer: it's on my company's web site.

Rob Toreki

Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at
esales**At_Symbol_Here**  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012

On Mar 2, 2015, at 12:00 PM, Keane J. Leitch <kjl44**At_Symbol_Here**CORNELL.EDU> wrote:

I am interested in knowing what fuel gas is being used at institutions with gas blowing operations involving quartz glass and best practices being used.  Also, could someone point me to a good reference for this type of work?
Keane Leitch, RBP,CCHO
Safety Manager
Physical Sciences Facilties Management
Cornell University
121 Baker Lab
Ithaca, NY 14853
607-255-8773 (t)
607-592-7079  (c )

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.