From: David Roberts <droberts**At_Symbol_Here**DEPAUW.EDU>
Subject: Re: [DCHAS-L] Phones in Labs? Please pardon the cross-listing
Date: Tue, 3 Mar 2015 16:13:01 -0500
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 262F86AA-966E-447D-9309-8AA13CD0951C**At_Symbol_Here**
In-Reply-To <9d82af42355942379e2cc65f830e858a**At_Symbol_Here**>

You do need phones of some type, but now most phones that are coming out are these ip phones, (cisco or whatever), which run through ethernet ports, not phone jacks. So you?ll probably need ethernet hard wires as opposed to old phone wires.

We also have emergency dedicated phones (pick up and dial 911 automatically) outside of our labs - 4 on the entire floor. Those may be the old analogue systems, I?m not sure (but I do check them once a year to make sure they are still operational). Again, those are also hard wired.

Hope that helps


> On Mar 3, 2015, at 4:04 PM, Smallbrock, Margaret A. wrote:
> Greetings,
> We are designing lab space and have run into the question of a hard wired phone? How many out there are still doing this? Would you recommend it? Suggestions and ideas are welcome.
> Thanks,
> Margaret Smallbrock
> Campus Environmental Health and Safety Manager
> South Dakota School of Mines and Technology
> 501 East St. Joseph Street
> Rapid City, SD 57701-3995

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.