From: Kevin Burns <Kevin.Burns**At_Symbol_Here**ALVERNIA.EDU>
Subject: [DCHAS-L] Fume Hoods
Date: Fri, 31 Jul 2015 10:16:41 -0400
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 9AF1B0F9-7B4C-463E-A84F-8677303A85AC**At_Symbol_Here**

I am currently finding myself in trying to deal with a fume hood problem. We had a mechanical problem that needed to be repaired causing The system to be shut down. Now that the system can be turned back on we need to have an air balancer come in and rebalance the system. After that my certification company would come in to certify that the hoods are maintaining proper CFMs for employees to work in them within the laboratories. The air balancer is in disagreement with the certification vendor. The air balancer says we have to have a policy that our face velocities for each hood must be 100cfm, where the certifiers are indicating that it's between 80 and 120 which that was what my understanding was.

I know this falls under ASHRAE standards, ANSI standards and OSHA standards, can you point me in the right direction of where to get the exact information?

Thank you, any information would greatly be appreciated.


Kevin Burns
Sent from my iPhone

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.