From: Sverker Molander <Sverker.Molander**At_Symbol_Here**CHALMERS.SE>
Subject: Re: [DCHAS-L] Assessing and predicting the health hazards of newly synthesized compounds for the development of SDSs.
Date: Tue, 13 Oct 2015 13:55:23 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: D242D8BC.F5D7B%sverker.molander**At_Symbol_Here**chalmers.se
In-Reply-To


Some inspiration can be found in the REACH guidance at ECHA's website (http://echa.europa.eu/support/guidance) - there are a number of overlaps between the requirements for registration under REACH and the content of an SDS. But I'm not fully aware of all details here.

Good luck!

Best regards, Sverker 

From: DCHAS-L Discussion List <dchas-l**At_Symbol_Here**med.cornell.edu> on behalf of "Tobias, Bruce" <btobias**At_Symbol_Here**WELLSTAT.COM>
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Date: Tuesday 13 October 2015 15:33
To: "DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU" <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Subject: Re: [DCHAS-L] Assessing and predicting the health hazards of newly synthesized compounds for the development of SDSs.

Yes, assigning hazards for novel compounds can be tricky. OSHA does not require you to test the properties of novel chemicals, but you do need to "consider the full range of available scientific literature and other evidence concerning the potential hazards." So make sure you do a thorough literature search..

 

The researcher who synthesized the compound can be an excellent source of information. Ask the researcher about the purpose for the synthesis, and what properties they hope the new compound will exhibit.. The researcher may also have some basic information such as melting point, color, odor, etc.

 

Good luck!

 

 

From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of Rupkey, Steve
Sent: Monday, October 12, 2015 10:59 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Assessing and predicting the health hazards of newly synthesized compounds for the development of SDSs.

 

Greetings:

 

What do others do to assess, predict and assign an OSHA 2012 health hazard classification to a newly synthesize compound develop by your home institution when you are required to develop a SDS?  

 

I'm not so concerned about assessing the hazards of mixtures of known chemicals but concerned more about new compounds, where the new compound has no history of a health hazard evaluation and where using the precursor chemicals is not as reliable predictor of its health hazards/toxicity. 

 

Does anyone use a toxicologist to review the chemical structure of the new compound to predict and present their "best judgment" regarding the health hazard classifications? 

 

Sincerely, 

Steve Rupkey, CIH

Argonne National Laboratory

srupkey**At_Symbol_Here**anl.gov

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.