From: Jeff Tenney <Jeff.Tenney**At_Symbol_Here**SDMYERS.COM>
Subject: Re: [DCHAS-L] 5-gallon waste container with vented lid
Date: Fri, 22 Apr 2016 12:35:56 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: B08465628BB05D4E9F4CD5F74ACA8F1F5D70124C**At_Symbol_Here**

US Plastic has a selection of lids for HDPE containers.

-----Original Message-----
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**] On Behalf Of Barbara Foster
Sent: Friday, April 22, 2016 8:17 AM
Subject: [DCHAS-L] 5-gallon waste container with vented lid

Does anyone currently use 5-gallon waste containers with vented lids (not a side vent, but a vent in the main lid)?
If so, could you please forward the vendor information to me?
I currently have vented lids for the 4-L bottles, but some of my researchers need larger containers.
(Eco funnels are not permitted at my institution.) Thanks very much!

Barbara L. Foster
College Safety Officer
Eberly College of Arts and Sciences
West Virginia University
DCHAS Fellow - American Chemical Society
304-293-2729 (desk)
304-276-0099 (mobile)

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.