| About This Archive | | DCHAS-L 2016 Index | | DCHAS-L Yearly Index | |
Check out Safety Emporium for your N95, N99, and face shield needs.
|
Previous by Date: Subject: [DCHAS-L] Sabbatical Date: Wednesday, April 27, 2016 2:24:46 PM Author: Wayne Wood <wayne.wood**At_Symbol_Here**MCGILL.CA> |
Next by Date: Subject: Re: [DCHAS-L] Requirements for Schlenk lines Date: Wed, 27 Apr 2016 14:34:23 -0400 Author: ILPI Support |
Schlenk lines are typically set up in a laboratory chemical hood to protect researchers from manipulation related physical and chemical hazards. When somebody is working or manipulating pyrophoric chemicals, Schlenk line must be present inside the chemical fume hood. For simple chemical manipulations, such as degassing, product drying and protein manipulations, a Schlenk line at lower bench (outside chemical hood) may serve the purpose.
Good luck.
Tilak
Tilak Chandra, Ph.D.
Chemical Safety Specialist
UW-Madison
tchandra**At_Symbol_Here**fpm.wisc.edu
Ph. 608-890-0255
608-622-9761 (Cell)
“--our job in safety is to make the task happen, SAFELY; not to interfere with the work…” Neal Langerman
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu]On Behalf Of Lisa Phillips
Sent: Tuesday, April 26, 2016 12:11 PM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: [DCHAS-L] Requirements for Schlenk lines
Trying to get information regarding safe practices and Schlenk line use.
At your institutions do you require all Schlenk lines to set up in hoods?
If not, when do you allow them outside of the hood
--
Lisa Bognar Phillips, CHMM, CCHO
Laboratory Compliance Program Manager
University Biosafety Officer
University of Notre Dame
636 Grace Hall
Notre Dame, Indiana 46556
Phone: 574-631-5037
Email: bognar.6**At_Symbol_Here**nd.edu
Previous post | Top of Page | Next post