From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**>
Subject: Re: [DCHAS-L] Biosafety guide suggestions?
Date: Wed, 22 Jun 2016 13:53:32 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 6379DCE4-9C70-4977-A873-DFCA2CB228DA**At_Symbol_Here**

>> Our students who perform BSL-2 research (which requires an approved protocol from our IBC, whether or not rDNA is involved) are required to read the appropriate sections of the BMBL, which is pretty much the biosafety bible.

Our biology students don't do BSL-2 work, but work with a variety of BSL 1 biohazards and this type of work is beginning to creep into our chemistry department. But I would like to educate them on what the differences between BSL 1 and 2 are so that they can recognize when they are getting close to that line. Reading BMBL without this context is a bit of a challenge. The ASM Teaching Lab biosafety guidelines appear more approachable, but still assume that the line between BSL 1 and 2 is clear, which may not be the case for synthetic nucleic acids or other novel uses of biological materials. I also find lists of, for example, 22 standard practices to be hard to absorb. 20 year old minds might be more nimble in this regard...

I guess I was thinking in terms more in the story-based, bite-sized approach if Finster and Hill for chemical safety.

Thanks for the links.

- Ralph

Ralph Stuart, CIH, CCHO
Chemical Hygiene Officer
Keene State College


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.